VLAN Settings
Network > IGMP Snooping > VLAN Settings
1. Log into your switch management page (see “Access your switch management page”
on page 5).
2. Click on Network, click on MLD Snooping, and click on VLAN Settings.
3. Select the VLAN ID to configure
4. Review the settings. Click Apply to save the settings.
• MLD Snooping Status – Click the drop-down list and select Enabled to enable
the IGMP snooping or Disabled to disable the feature
• Version – Click the drop-down list and select IGMP version
Querier Settings
Network > MLD Snooping > Querier Settings
1. Log into your switch management page (see “Access your switch management page”
on page 5).
2. Click on Network, click on MLD Snooping, and click on Querier Settings.
3. Select the VLAN ID to configure
4. Review the settings. Click Apply to save the settings.
• Querier State – Click the drop-down list and select Enabled to enable the
Querier Status or Disabled to disable this feature.
• Interval – Enter the amount of time you want your switch to send IGMP
queries.
Router Settings
Network > MLD Snooping > Router Settings
1. Log into your switch management page (see “Access your switch management page”
on page 5).
To Next Page
Loading...
