Trojan T2-C User Manual

T2-C User Guide 11
1
Introduction
Original instructions
These instructions are Trojanlabel's original instructions for the Trojanlabel press
(henceforth called the machine or TrojanTwo-Compact press or T2-C press).
Purpose
The purpose of these instructions is to ensure correct installation, use, handling and
maintenance of the machine.
Accessibility
The instructions are to be kept in a location known to the staff and must be easily accessible
for the operators and maintenance personnel.
Knowledge
It is the duty of the employer (the owner of the machine) to ensure that anyone who is to
operate, service, maintain, or repair the machine have read the instructions. As a minimum,
they should have read the part(s) relevant for their work. In addition, anyone who is to
operate, service, maintain, or repair the machine is under obligation to look for information
in the instructions themselves.
General information
Manufacturer
The machine has been manufactured by:
Company name: Trojanlabel
Address: Marielundvej 46A 2 sal, 2730 Herlev, Denmark
The machine's designation
The machine's complete designation is Label Press type T2-C.
Machine plate
The machine plate (picture) is situated on the back side of the machine on the middle
bottom:

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English