Trojan T2-C User Manual

Power on
20 T2-C User Guide
3 The machine is fully functional when the TrojanTwo tab is visible in the TrojanControl
software. In the right side status bar the System State field is online, and Media Path State
is ready.
Note: System state can only be online if all ink tanks are installed and the printhead is also
installed and primed with ink. See “Installing ink tanks and the printhead” on page 20.
Note: Web state can only be ready if the label material is loaded in the unwinder and
rewinder and tension for the label web is calibrated. See “Loading the label material” on
page 29.
Installing ink tanks and the printhead
Installing the ink tanks
The T2-C press uses CMYK ink tanks. Each contains 2 liters of ink when opened. Every T2-C
ink tank is QA chip protected ensuring that only genuine Trojanlabel ink tanks can be used.
The tray for the ink tanks is situated on top of the machine. The ink tanks are installed from left
to right in CMYK order.

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English