Trojan T2-C User Manual

T2-C User Guide 29
4
Loading the label material
There are two common methods of threading the machine: threading from scratch, i.e. there is
no material present in the machine, or using the currently installed material to thread the
machine.
Unwinder and rewinder roll direction
Rolling direction unwinder - Ink jet coating on the inside or
outside
Regardless of the threading procedure, you must insert the label roll on the unwinder core
according to the ink jet coated side (coated side must be up for printing).
1 Outside - Printing on the outside of the label roll
If the ink jet coating is on the outside of the material, which is the most common, place the
roll so the end of the material is facing clockwise.
Important: Ensure Media Settings > Unwinder or Rewinder label position states:
Outside

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English