Preparing the T2-C press for transportation
T2-C User Guide 113
2 Default password to service menu is 321.
3 Select one by one each 'Empty filter CMYK 5ml' script and press 'Run' button after selecting
each color.
Note: The empty ink filter script only requires a few seconds. As there is about 15ml ink in
every ink filter normally, it is advised to run the ink filter emptying scripts 2-3 times for each
color.
Empty and clean the waste ink bottle
Empty the waste ink bottle before transportation. See “Emptying the waste ink bottle” on page
99.
For transportation, it is advised to fix the drawer of the waste ink tray with the 2 screws.
Cleaning of the waste ink bottle can be done simply by washing the waste ink bottle under tap
water.
Removing the ink tanks
1 Disconnect all the connectors from the ink tanks.
2 Use the orange plastic caps that came with the ink tanks to seal the connectors.
3 Cover the ink connectors and chip reader cables with a plastic bag and apply zip ties to seal
the bags.
To Next Page
Loading...
Need help?
General