Maintenance
T2-C User Guide 99
Cleaning other rollers
Visually inspect all other metal rollers throughout the web path and use a wet lint-free cloth to
wipe the ink/dust off from each roller. Remove the label web from the web path if needed to gain
access to all rollers.
Wipe each roller using a wet lint-free cloth.
Emptying the waste ink bottle
Maintenance routines which protect the printhead produce some waste ink. This waste ink goes
into the waste ink bottle. The waste ink bottle is located inside the machine cabinet and can be
accessed through a drawer on the left side of the machine.
To Next Page
Loading...
Need help?
General