Trojan T2-C User Manual

Preparing the T2-C press for transportation
112 T2-C User Guide
3 Select 'Empty IR Tanks' script from the upper scroll down list and press 'Run' button to run
script.
4 The empty IR tanks process takes about 5 minutes as it is emptying the reservoir ink tanks
one by one. Movement of the ink from the reservoir ink tanks to the 2L ink tanks is indicated
on the right side status bar where the ink levels are displayed. When there is no more
movement indicated on the status bar, then the script is completed.
Removing the ink from the ink filters
To remove the ink from the ink filters, the same service menu can be used as for emptying the
reservoir ink tanks.
Warning: The hidden service menu is reserved for skilled technicians only! End users are not
advised to use other functions in the hidden service menu (unless technical support of
Trojanlabel is asking for this) than the empty ink process and empty ink filters process.
1 Go to the TrojanTwo tab and press the touchscreen on the 3 points in sequential order to
access the service menu.

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English