Trojan T2-C User Manual

Loading the label material
30 T2-C User Guide
2 Inside - Printing on the inside of the label roll
If the ink jet coating is on the inside of the material, then place the roll so the end of the
material is facing counter-clockwise.
Important: Ensure Media Settings > Unwinder or Rewinder label position states:
Inside
Rolling direction rewinder
The rewinder can place the label material on the outside or inside of the roll. The criteria are the
same as for the unwinder, please refer to the above for placement and direction and update the
Media settings to reflect this.

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English