Setting up the T2-C press
18 T2-C User Guide
Cabling (network and power supply)
The machine has two cable inlets:
1) Power supply
2) Ethernet
Only the power supply cable is necessary for powering up the machine. The network cable is
necessary for sending new print jobs to the T2-C press and for remote support/software
updates.
Note: Ethernet cable is not included in the T2-C press package. It is recommended to use
Cat5, Cat5e or Cat6 Ethernet cable versions to connect the T2-C press to the local network
and/or to the Internet.
# Description
1 Ethernet port
2 Power on/off switch
3 Power supply
To Next Page
Loading...