User Interface (UI)
62 T2-C User Guide
• TOF mode: Displays current TOF mode set in the TrojanTwo tab > Media Settings menu.
Can be 'Continuous', 'Diecut' or 'Blackmark'.
• Print queue: Displays the current print queue status. Can be 'Running (x)' or 'Paused (x)'
where x is the number of jobs pending in the print queue.
• Rewinder (m): displays the length of the label material in meters currently on the rewinder.
• Unwinder (m): Displays the length of the label material in meters currently on the
unwinder.
• Print queue (m): Displays the total length of the print job(s) pending in the print queue.
• Maint. dist.: Displays the mid job maintenance distance set in the TrojanTwo tab > Media
Settings > Advanced menu.
• Slitter enabled: 'Yes' if slitter option is enabled, 'No' if slitter option is disabled. Slitter can
be enabled/disabled in the TrojanTwo tab > Media Settings > Advanced menu but only
if the current TOF mode is set to Diecut. See “Using the built in slitter for the T2-C press”
on page 93.
• Ink levels: Displays ink levels in ink tanks and reservoir ink tanks. Also indicates movement
of the ink when reservoir tanks are being refilled from the ink tanks.
General settings (HOME tab)
Overview menu
Information from currently printed job, including:
• Preview image of the label which is being printed at the moment
• Label counter
• Name of the print job in the Job Library
To Next Page
Loading...
Need help?
General