Trojan T2-C User Manual

Driver installation and features
T2-C User Guide 59
• Buffer: Buffers the whole print job into the user PC's memory before sending it to the
TrojanTwo press. This can be useful when the hardware of the user PC (where the
driver is installed) is not powerful enough to generate the print stream in real time.
Especially for large print jobs with variable data.
• Store only: Sends and stores the selected print job into the T2-C press Job Library
without actually printing. The stored job can be printed later from the Job Library menu
in the T2-C touch screen.
• Mask Optimisation: Mask Optimisation is a facility that switches between two different
methods of image processing, affecting how an image is processed and printed. By
default, Mask Optimization is selected to make sure that it optimizes the image
processing for the majority of the printing applications used by the end users. However,
for some users (particularly those using FlexMail), printing artifacts appear in the
output. If this happens, the user should deselect 'Mask Optimisation' to correct this
issue.
Integrating additional color profiles
• Color profiling is done on demand by Trojanlabel.
• Color profile installer packages are available at official Trojanlabel distributors or from
Trojanlabel.

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English