Trojan T2-C User Manual

Printing modes
48 T2-C User Guide
Blackmark printing mode
• In blackmark label material, the label material has pre-printed registration marks, so called
'blackmarks' on the label material (can be on front or back side of the label roll).
• To set the T2-C press to Blackmark printing mode, go to TrojanTwo tab > Media Settings
menu and select the Blackmark button in the TOF mode field. Then press the Save and
Apply button to apply the setting changes.
Note: TOF = Top of Form. The top of form algorithm describes how to detect the top of the
next label.
Example of blackmark label material. Registration marks can be on the front or back side
of the label roll.
Calibrating the label gap/blackmark sensor

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English