User Interface (UI)
82 T2-C User Guide
• Force Stitch Mode checkbox: Normally Stitch mode can be enabled from the T2-C
driver. See “Driver features and functions” on page 56. However enabling the stitch
mode checkbox will create a stitch mode job from the actual print job when printed. This
function is useful when the job was sent from a RIP software where the stitch mode
option is not available.
Note: Press the save button when name of the print job is changed or when the force stitch
checkbox is selected to save the changes.
Print Queue menu
• Print jobs are queued progressively as they are sent and processed in a FIFO (first in first
out) system. The queue can be managed from the Print queue menu.
• The print queue is stored even if the T2-C press is restarted.
Note: The currently printing job in the queue cannot be deleted.
Icon Description
Pause/Resume Print Queue button
• While a print queue is paused, the print
jobs are pending in the queue and printing
only starts when the queue is resumed.
• The current print queue status (if running
or paused) is also always displayed in
right side status bar.
• The number in () indicates the number of
print jobs pending in the print queue.
To Next Page
Loading...
Need help?
General