Trojan T2-C User Manual

Power on
24 T2-C User Guide
4 Remove the orange protective plastic cover from the printhead cartridge. Holding the
printhead cartridge by the handle:
a) Release the flaps covering the ink ports.
b) Release the clip retaining the cover near the center of the printhead cartridge.
c) Carefully remove the protective cover.
5 Remove the protective strip from the electrical contacts. While holding the printhead
cartridge by the handle with one hand, grasp the pull tab with the other hand and, slowly
and carefully, peel back the plastic strip covering the electrical contacts.
Note: Dispose of the removed strip immediately and do not allow the removed strip to
contact the electrical contacts.

Trojan T2-C Specifications

General

Brand	Trojan
Model	T2-C
Category	Label Maker
Language	English