Driver installation and features
T2-C User Guide 55
• During the setup process, the installer will detect the T2-C press as a TrojanTwo on the
network. Select the detected TrojanTwo and press the 'Next' button to continue installation.
• Depending on Local Network policy there might be occasions when the auto detection of
the T2-C press is not working. In this case type the IP address of the machine manually.
Note: The current IP address of the T2-C press can be checked on the touchscreen in the
HOME > Settings > Network menu.
• You might be asked a couple of times (depending on the Microsoft Windows OS version)
to give permission to proceed with setup. Press 'Yes' or 'Unblock' each time and wait until
the progress bar finishes the installation.
• When the installation is finished you might need to restart your PC to make sure that the
installation process made all necessary changes in your operating system.
• Print a test page (test page is the regular Microsoft Windows test page set to A4 size sheet).
Unselect if you do not want to print this out.
To Next Page
Loading...
Need help?
General