User Interface (UI)
T2-C User Guide 71
• Cost/label (ink + PH) calculation is the cost/1 label in the actual print job based on
ink tank price and printhead price given in the HOME > Settings > Consumables
menu. Print head cost is added.
• Cost/label (ink + PH + media) calculation is the cost/1 label in the actual print job
based on ink tank price and printhead price given in the HOME > Settings >
Consumables menu and in addition media price given in the TrojanTwo tab > Media
Settings menu. See “Media Settings menu” on page 84.
• Job ID/Name is the name of the actual print job in the Job Library. A unique name can
be specified instead of random numbers in Job Library. See “Job Library menu” on
page 79.
Note: Prices marked by * contain estimated cost of maintenances as well (pre-, mid-, post
job maintenance). Prices without * mark are pure printing cost of 1 label without
maintenance cost added. See “Maintenance menu” on page 77.
Engine & Printhead Usage Button
• TrojanControl: Total statistics for the T2-C press for ink usage, printed length, printed
area, number of labels and printed jobs.
• Engine: Total statistics and history for print engine(s). If there is a print engine
replacement, all serial numbers will be registered and statistics for each print engine
can be compared.
• Print head: Total statistics and history for all the printheads which have been
connected to the T2-C press. All connected printhead serial numbers will be registered
and statistics for each printhead can be compared.
Note: A printhead must print at least 1 page to be able to register the usage statistics.
A freshly installed printhead that has not printed any pages at the certain T2-C press is
displayed as an empty record.
Note: Printhead usage data is the total usage in the particular T2-C press. It does not
include usage history from usage data on other T2-C presses if the particular printhead
has been used in multiple machines.
To Next Page
Loading...