Table 196: Selections for parameter ID1082
Selection
number
Selection name Description
0 No response
1 Warning
2
Fault, stop mode after fault
according to ID506
3
Fault, stop mode after fault
always by coasting
1083 FOLLOWER TORQUE REFERENCE SELECTION 6 (2.11.4)
Select the torque reference for the follower drive.
1084 CONTROL OPTIONS 6 (2.4.19)
The parameter is available for NXP drives only.
PARAMETER DESCRIPTIONS VACON · 355
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
8
To Next Page
Loading...
