Valleylab Force FX-C - Page 131

Situation Possible Cause
Abnormal neurom uscular Metal-to-metal sparking
stimulation \ stop surgery
immediately).
Can occur during coag,
Abnormal 50-60 Hz leakage currents,
Force FXTM-C Service Manual
Correcting Malfunctions
Recommended Action
Check all connections to the generator, patient return
electrode, and active electrodes,
Use a lower power setting for the Fulgurate and Spray
modes or select the Desiccate mode,
Inside the generator, carefully inspect for damage that
may cause shorting between the AC line voltage and
connected patient components,
6-9