Colors of the working chamber lighting
Color Status
Working cham-
ber door
Green The machine is ready for
operation.
unlocked
White The machine is ready for
operation.
unlocked
Blue The machine is operating. locked
Red
A machine malfunction has
occured.
locked
4.7 Axes/ A-B axis module
This machine has 5 axes: 3 linear axes and 2 rotational
axes.
4.7.1 Linear axes
The spindle moves along these axes.
FIG. 5
4.7.2 Rotary axes
The blank holder rotates about these axes.
FIG. 6 A-B AXIS MODULE IDENTIFYING BOTH THE A AND B AXIS
4.8 Location of the identification
plate and serial number
The identification plate of the machine contains identi-
fying information such as the serial number. You can
find the identification plate and machine serial number
at the following location:
FIG. 7 SERIAL NUMBER ON THE IDENTIFICATION PLATE (MARKED ORANGE)
Original Operating Instructions:E5
Version: 4/27/2023
Get to know your machine
EN 12
To Next Page
Loading...
