VHF E5 - Software and Firmware Updates

7.26 Updating the softw are and
firmw are
7.26.1 Updating DENTALCAM &
DENTALCNC
Instructions can be found in the DENTALCAM &
DENTALCNC user information.
7.26.2 Updating the firmw are of the
machine
The firmware is the internal control software of your
machine. New versions may introduce new functions
and improve existing ones. New firmware versions
come as part of new versions of DENTALCNC.
For more information, see the DENTALCAM &
DENTALCNC user information.
Original Operating Instructions:E5
Version: 4/27/2023
Maintenance
EN 96