VHF E5 - MAINTENANCE; Basic, Preventive, and Section Maintenance; Servicing and Warranty

7 MAINTENANCE
Some day-to-day basic maintenance and preventive
maintenance is essential to keep the machine mech-
anics and electric components in good condition for
proper machining results.
It is your responsibility to make sure that preventive
maintenance, as well as basic maintenance, is
performed.
You are the only one who can ensure that your
machine receives the proper maintenance care.
7.1 Basic maintenance
Basic maintenance includes tasks which are part of
everyday operation. You are responsible to ensure that
these tasks are carried out according to the main-
tenance table. You only need minimal manual skills for
these tasks and most required tools are provided with
the machine.
Maintenance table (page 41)
7.2 Preventive maintenance
Preventive maintenance for this machine has to be
scheduled every 2years, or after 2.000operating
hours at the latest.
To schedule preventive maintenance, contact cus-
tomer service.
7.3 Maintenance section
For your convenience, DENTALCNC lists all basic main-
tenance tasks in the Maintenance section. In the Main-
tenance section, you can see when the individual tasks
are due.
When you have performed a maintenance task,
mark it as complete in the Maintenance section. This
will keep the list up-to-date.
7.4 Servicing
Customer service is your main contact for all service
related questions. They will provide you with spare
parts, maintenance tips and they will perform
preventive maintenance for you on request.
When your machine is delivered or installed, ask
the service technician for contact details for the cus-
tomer service team. We also recommend schedul-
ing the first preventive maintenance appointment
at this point to ensure your machine gets proper
maintenance.
7.5 Warranty
The machine and the extra equipment are warranted
for a period of 24 months or 2,000 operating hours,
whatever comes first. The warranty covers defects in
materials or fabrication as long as the regulations for
using the machine in all documents are followed.
Of course, the warranty also covers wear parts as long
as their failure cannot be attributed to the function-
related abrasion.
 Spare parts and wear parts – on page42
Original Operating Instructions:E5
Version: 4/27/2023
Maintenance
EN 40