4. If the spindle has moved into the tool change pos-
ition, continue with the next step.
5. ⚠ CAUTION! Wear gloves.
6. Open the working chamber door.
7. Hold the tool in the collet chuck in place.
FIG. 66
8. Confirm the current message.
The collet chuck opens.
9. Remove the tool from the collet chuck.
FIG. 67
10. Close the working chamber door.
11. Confirm the current message.
The following happens:
a. The collet chuck closes.
b. The spindle moves to its default position.
Original Operating Instructions:E5
Version: 4/27/2023
Operating the machine
EN 38
To Next Page
Loading...
