10
Safety
Meaning of
warning symbols
Read the operating manual
Read and observe the operating manual and the safety regulations
pri or t o commissioni ng! The machine may only be commi ssi oned on-
ce the operating manual has been read and understood. This applies
in particular to the safety instructions.
Swit ch off the engine
Perform all maintenance, repa ir and adj usting work only when the im-
plement is at a standstill. Serious or fatal injury can be the result.
Maximum cardan shaft speed 540 rpm
The prescribed maximum cardan shaft speed of 540 rpm must not be
exceeded. The consequence could be damage to the implement.
Distance from the opened rear flap
Remain a safe distance aw ay fr om the rear f lap i f the safety catch is
not activated. An unsecured rear flap may drop of its own accord. Se-
ri ous or fatal i njury can be the resul t.
Distance from the slewing range
Remain a safe di stance aw ay f rom the sl ewi ng area and t he deploy-
ment/retraction area. There is a risk of crushing. Serious or fatal injury
can be the result.
Caution regarding the knife area
Remain a saf e distance away from the kni fe ar ea. There is a danger
of being crushed and cut by the knives or sharp edges. This could
otherwise result in serious injury.
To Next Page
Loading...
