Vicon RF 2235 - System-Specific Malfunctions: AutoPlus, Hydraulics, Cutterbar

126
Eliminating malfunctions
Malfunctions
Malfunctions can often be eliminated quickly and easily . Before calling
Customer Service, refer to the table to check whether the malfunction
i s one you can eli mi nate yoursel f .
AutoPlus-Pilotbox
Electronics
Problem Cause Solution
Low battery voltage. > The battery voltage is under 9
volts. Check the tractor's power
supply.
Twine malfunction. The twine wrap-
ping does not start.
> Open the front hood and check
the twine guide and sensors.
> After clearing the fault, press
the “GO” button.
Net malfunction. The net wrapping
does not run.
> Open the front hood and check
the net, net guide and sensors.
> After clearing the fault, press
the “GO” button.
Net motor malfunction. The net mo-
tor does not run.
> Open the front hood and check
t h e c o nn e c t ions .
> After clearing the fault, press
the “GO” button.
> If the faul t cannot be cleared,
contact customer services.
> T he net was drawn i n at the
wrong moment.
> Open the front hood and check
the net, net guide and sensors.
> After clearing the fault, press
the “GO” button.
Problem Cause Solution
No display on the AutoPlus-Pilot-
box
The control unit has no power
• Switch on the device
• Check the system's power sup-
ply
• Check the fuses in the Au-
toPlus control box
Internal control system problem Pl ease contact your suppl i er