Cleaning and care
83
Cleaning
Cl eani ng i s perf ormed w i th a hi gh-pr essure cl eaner, w ith t he ex cepti -
on of the bearings and piston rods of the hydraulic cylinders and elec-
trical parts.
> After each use, remove any coarse dirt and crops from the imple-
ment.
After cleaning
After cleaning:
> Lubri cate all of the beari ngs.
Care
The implement will be completely ready to be used in the next seaso n
i f the fol l ow i ng i nstr ucti ons are observed:
> applying a protective layer of oil to all bright work tools. Only use
approved, biodegradable oil: rapeseed oil, for example.
> Repair any paint damage.
> Check safety stickers and replace or add as requir ed.
To Next Page
Loading...
