18
Safety
Operation
The implement should not be put into operation for the first time
until the user has been trained to use it.
The i mplement must not be used unti l i nstructi on has been given by
di stri bution company employ ees, company representati ves or manu-
facturer 's employees. If i niti al operation is performed without i nstruc-
tion, damage to the implement can be caus ed by operating errors and
accidents can occur.
Ensure that the implement is in perfect working condition.
Do not operate the implement unless it is in perfect wo rking c ondition.
Check all important components and repl ace any defecti ve compon-
ents before starting the implement. Defect component s can cause da-
mage to equipment and injury to persons.
Check the protective equipment
The prot ecti ve equipment must not be removed or by-passed. Check
all protective equipment before starting the implement. Unguarded
parts of the implement can cause serious or fatal injuries.
No riding on the impl em ent
Neither personnel nor objects are allowed to be transported on the im-
plemen t at any time. Riding on the implement is hazardous and strictly
prohibited.
Make sure the immediate vicinity is clear
Check the surrounding area of the implement before starting and con-
tinually during operation. Make sure the operator has an adequate
view of the work area. Only begin work if the imm ediate vicinity is clea-
red of any persons or object s. There is otherwise the risk of serious or
fatal injury.
Retighten all nuts, bolts and screws
Regularly check that the nuts, bolts and sc rews are fully tightened and
tighten them, if necessary. Screws can work loose when the imple-
ment is used. The conseque nce can be dam age to the implement and
accidents.
Instructions in the event of malfunctions
In the event of a malfuncti on, stop, shut down and secure the imple-
ment immediately . The malfunction may be eliminated imm ediately, or
your deal er must be assigned the task. Using a faul ty i mplement can
cause accidents or damage.
To Next Page
Loading...
