Operation
73
Operation
Safety
Observe safety instructions
Observe the safety instructions for the performance of all work. Any
di sregard for safety i nstr ucti ons can lead to serious or fatal i njuri es to
persons.
No riding on the impl em ent
Neither personnel nor objects are allowed to be transported on the im-
plemen t at any time. Riding on the implement is hazardous and strictly
prohibited. There is otherwise the risk of serious or fatal injury.
There should be no personnel standing in the working area
No-one is permitted to remain within the working area. Personnel can
be caught by the i mpl ement. T here is otherw ise the r i sk of seri ous or
fatal injury.
Maximum cardan shaft speed 540 rpm
The cardan shaft speed must not exceed 540 rpm and has to be ad-
apted to t he condi tion of t he crop. Hi gher speeds can cause damage
to the implement.
Do not upset the cardan shaft
The cardan shaft between the tractor and implement must not be jol-
ted in any operating or transport position. Upset cardan shafts can
cause damage to the implement and tractor.
Note the contour of the terrain
Pay even more attention when driving on an incline. Avoid inclines on
which the combination (t ractor and i mpl ement) coul d sl i p or overturn.
There is an increased risk of tipping and injury if the implement is
towed in a direction offset in relation to the direction of the slope.
To Next Page
Loading...
