118
Accessories
Hitch-drawbar eye
When the tractor is equipped w it h a hitch hook, the drawbar must be
equipped with a draw hook.
Dummy blades for
OptiCut
For a variabl e use of the implement, the kni ves can be replaced wi th
dummy blades to change the cutting length. It is necessary to fit the
dummy blades so that the crop is fed in unifor mly.
Dummy blades are fitted in the same way as the knives.
→
See »Removing the knives« and »Fitting the knives«, page 51.
→
See »Removing the knives« and »Fitting the knives«, page 54.
Roller for baffle
plate
The baffl e plate r ol ler improves the w ay the crop is fed in. The rol ler
will be fitted on the front baffle plate support (as shown).
Hitch-draw-
Dummy blade
Roller for baffle plate
To Next Page
