22
Safety
Caution when cleaning with a high-pressure cleaner
Cauti on when cleani ng wi th a high-pr essure cl eaner. Beari ngs, seals
and pipe unions are not waterproof. Avoi d damaging the implement;
the bearings, seals and pipe unions must not come into direct contact
with the high pressure water jets.
No corrosive washing additives
Do not use any corrosive washing additives for cleaning. The bright
metal surfaces can get damaged.
Prior to
carrying out
welding work
Disconnect all electrical connections from the tractor when carrying
out welding on the attached implement. Damage may otherwise be
caused to the electr i cal system.
Tighten bolt and screw connections
All screwed/bolted connections that are released during maintenance
and repair operations must be retightened. Serious injuries and dama-
ge to property can be caused by loose bolt and screw connections.
Further regulati-
ons
Observe the regulations
In addi t i on t o the safety instructions l ist ed above, please observe the
following:
•
Accident prevention regul ati ons.
•
Generally recognised safety regulations, occupational health re-
quirements and road traffic regulations.
•
Instructions given in this operating manual.
•
Regulations pertaining to operation, maintenance and repair.
Warranty
The warranty and manufacturer's responsibility will no longer be valid
i f the i nstructi ons given in the chapter on Safet y are not r espected, if
maintenance is inadequate or incorrect, if the implemen t is overloaded
or used for purposes other than those for w hi ch it w as intended, or if
unauthorised modifications are made to the implement.
To Next Page
Loading...
