Familiarise yourself with the device
23
Fam ili arise yourself with the device
General
This chapter contai ns the foll ow ing infor mati on:
•
Range of application and properties
•
Technical specifications
Range of applica-
tion
This implement is a round baler . The implement is solely intended and
designed for the purpose of gathering cut, non-woody or slightly woo-
dy pl ants, parti cul ar l y stem crop, fr om the ground. The gather ed crop
is collected together and cut using the cutterbar. The crop is formed
into a round bale in the bale chamber and then wrapped with twine or
net material. This must always take place in compliance with the con-
ditions, instructions, procedures and regulations in this docum ent and
shown in the warning diagrams and safety diagrams on the imple-
ment.
Prope r use of the i m -
plement
This impl ement is only desi gned to be used for agri cul tur al purposes.
Any use whatsoever other than the above mentioned is not proper
use. Neither the manufacturer nor the dealer is liable for any damage
resulting from improper use of the implement. The operator of the im-
plement alone is liable in this case.
Properties
The pick-up equipment tak es the crop from the ground an d feeds it in-
to the bale chambe r. In this process, the crop is also cut by the OptiCut
cutterbar . The bale is uniformly formed by the rotary motion of the rol-
ler systems. The bale expands due to the constant feeding of crop.
When the chosen bale density is achieved, the bale is tied with either
twine or net. The rear flap is opened and the bale is ejected.
Protecting the stubble
The optional load-dependent compressed-air brake for the implement
enables t he braking for ce to be adjusted in di rect dependence to the
actual weight in field use. The braking force is manually adjusted in 3
stages. This function protects the stubble.
To Next Page
Loading...
