Operation
79
Depositing the
bale
Deposit the bale on level ground
Always deposit the di scharged bale on a flat surface. Never deposit
the bale on a slope. The deposited bale must not keep m ov ing uncon-
trollably as a result of its weight and ej ection speed. A rolling bale can
result in damage or serious or fatal injuries.
Distance from the rear flap
Maintain a safe distance from the rear flap. Ensure that there is nobo-
dy in the area of the rear flap. The rear flap can open by itself, caus ing
the bal e t o r ol l out of t he bal e chamber. Ser i ous or fatal injury can be
the result.
N
OTE
When the bale i s not deposit ed in the stop positi on, raise the pi ck- up
equipment and move to the depositing location.
> Open the rear flap via the control device.
The bale is discharged.
> “Open rear flap” is displayed.
> Close the rear flap via the control device.
→
»Closi ng the rear fl ap«, page 46.
> Leave the control device lever in the position for closing the rear
flap for approximately 3 seconds to allow the pressure to build up
for the default bale density.
To Next Page
Loading...
