106
Maintenance
Wheels
Do not driv e wit h worn or damaged ty res
Replace worn or damaged tyres immediately. There is a high ri sk of
accident especially when driving on the road with such tyres.
Repair work
Repair work to wheels and tyres must be carried out:
•
by a specialist.
•
with the correct tools.
Specialised knowledge, specific tools and sound equipment are ne-
cessary to fit wheels and tyres. Personnel may be injured or the imple-
ment may be damaged as a result .
Prescri bed tyr e size
Onl y fi t t yres w hich are t he specifi ed siz e. Fi tti ng tyres of di fferent si -
zes can cause accidents. Personnel may be injured or the implement
may be damaged as a result.
Prescri bed tyr e pressure
Only use tyres set at the prescribed tyre pressure. Incorrect tyre pres-
sures can result in seri ous damage to personnel or traffi c accidents.
Securing the implement
Secure the implement against inadvertent starting and rolling away.
Use wheel chocks. The implement must be standing on firm and lev el
ground and, if necessary, must be supported during work. Unsecured
or non-supported impl ements can cause accidents. There i s otherwi -
se the risk of serious or fatal injury.
Tightening the
wheel nuts
Tighten the wheel nuts:
•
After the first 250 bales.
•
At the start of the season.
•
After every tyr e/w heel change.
Tighten the wheel nuts to 290 Nm.
To Next Page
