Rev AB CLARiTY Error messages 8-11
Videojet 8520 Operator Manual
E1005 ‘Print Limit Exceeded’ - The current job is selected with
a print limit (i.e. a limit on the number of times the job
can be printed). This limit has been reached but the
printer has received a further print signal that would
have exceeded the limit. This error clears after selecting
a new job. Alternatively, a job selection command or
variable data update from an external source also clears
this error.
Fault
E1006 ‘Image Update Failure’ - CLARiTY is unable to update
the image that is printed next. This usually occurs
because products are too close to each other. Touch the
Clear button to restart the printer.
Fault
E1007 ‘Image Update Failure’ - CLARiTY is unable to update
the image that is printed next. This usually occurs
because products are too close to each other. Touch the
Clear button to restart the printer.
Fault
E1100 ‘Invalid Job File (Bad Field Reference)’ - Source field
reference incorrect - correct in CLARiSOFT
Warning
E1101 ‘Invalid Job File (Missing Data Source Field)' - Job file
missing a data field - correct in CLARiSOFT
Warning
E1102 ‘Invalid Job File (Duplicate Named Fields)’ - Field
names have been duplicated in Job File - correct in
CLARiSOFT
Warning
E1103 ‘Invalid Job File (failed To Render Logo)' - Invalid or
missing graphic file - correct in CLARiSOFT
Warning
E1104 ‘Invalid Job File (Invalid User Concession)' - Default
offset date falls outside the date range - correct in
CLARiSOFT
Warning
E1200 ‘Invalid Job File (Invalid Barcode Character)' - Barcode
contains invalid characters for type - correct in
CLARiSOFT
Warning
E1201 ‘Invalid Job File (Invalid Barcode Check Digit)' - Check if
the digit is incorrect - correct in CLARiSOFT
Warning
E1202 ‘Invalid Job File (EAN data longer than 48 characters)’ -
EAN barcode contains more than 48 characters - correct
in CLARiSOFT
Warning
E1203 ‘Invalid Job File (EAN barcode out of specification)' -
Characters to create Application Identifier is insufficient -
correct in CLARiSOFT
Warning
Error
No
Report on CLARiTY Operator Interface Status
Table 8-6: CLARiTY Error Messages (Continued)
To Next Page
Loading...
