Vivotek NR9581 - How to Configure the Station General Settings; Log Settings

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 155
How to Congure the Station General Settings
Select the target station from the hierarchical management tree, then click Configuration
> Station Settings > General Settings on the menu bar (or right-click the station on the
hierarchical management tree and select Station Settings > General Settings). The Station
General Settings window will pop up.
Server Settings
In this section, you can modify the Station Name.
Log Settings
In this section, you can set up Log Settings for the station.
The VAST server allows user to search for the recorded
log through VAST Playback. For more information,
please refer to How to Search Logs on page 276.

Log level: Select High (only record high-level logs),
Normal (record high-level and normal-level logs), Low
(record all logs). For detailed information about log
levels, please refer to page 277.

Reserve Time: Enter the time interval that you want
to reserve the log record. The maximum value is 365
days.