VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 73
In addition to the PTZ panel, the following hot key combinations are also available:
Ctrl + NumPad (PTZ control)
Up Ctrl + 8
Left Ctrl + 4
Home Ctrl + 5
Right Ctrl + 6
Down Ctrl + 2
Focus (Far - Near) Ctrl + 1 Ctrl + 3
Zoom (Out - In) Ctrl + 7 Ctrl + 9
Pan Ctrl + /
Stop Ctrl + *
Patrol Ctrl + -
Preset locations (pre-
congured by users)
Ctrl + 0~9 (number keys above the alphabetic keys)
Full screen Ctrl + F
Single view Ctrl + V
Previous layout page Alt + PageUP
Next layout page Alt + PageDown
First layout page Alt + Home
Last layout page Alt + End
Snapshot Ctrl + S
Stop alarm Ctrl + A
Mute audio from current
stream
Ctrl + M
Start/ Stop rotation Ctrl + O
VIVOTEK's latest SD8xxx speed dome series supports the Continuous Move control. The
"Click to move" enables one movement by every mouse click on the PTZ buttons.
When Continuous Move is enabled from the PTZ panel, you can click and hold down the
mouse button on an arrow key to command the camera to continue moving to that direction.
The move will stop when you release the mouse button. Also, if the pan/tilt/zoom/focus speed
is congurable for a PTZ camera, you can use the Speed button to display the speed options:
pan, tilt, zoom, focus, panoramic, and rotate speeds.
For sheye cameras, two more options will be available: Panoramic speed and Rotate speed.
These two options apply to the onscreen control for the Panoramic and Regional views.