Winkhaus blueCompact - 1.1 Compile components as required; 1.2 Key; 1.2.1 Active keys

1.1 Compile components as required
The activation set is the basis for the locking system. Other
components must be purchased in addition to the set as
required.
The activation set contains the following components:
n Active key
– Ä Chapter 1.2.1 “Active keys” on page 16
n 4 passive keys in dierent colours:
– Ä Chapter 1.2.3 “Passive keys” on page 22
– green
– pink
– yellow
– blue
n Activation card
–
Ä Chapter 1.3 “Activation card” on page 23
n PUK card
– Ä Chapter 1.4 “PUK card” on page 24
n Adapter
–
Ä Chapter 1.2.4 “Adapter” on page 23
n Quick start guide
1.2 Key
1.2.1 Active keys
1 Ring hole
2 Battery compartment lid
3 Button
4 Key bow
5 Tip of the key
6 LED display
Active keys feature a button (3) to activate cylinders, a bat-
tery and a LED display (6). You can use the ring hole (1) to
fasten the key to a key ring.
For a clear allocation of the keys in the app, a
Winkhaus UID is engraved on the tip of the
key (5).
This Winkhaus UID consists of the logo
4HOME and a six-digit number.
Example: 4HOME112773
Fig. 4: Activation set
Fig. 5: Active key
Product overview
23.03.2020blueCompact electronic locking system16