WARNING!
Hazard to persons due to malfunction in
emergency opening with an active key.
Replace the battery of the active key following this
signal immediately to ensure that the door does not
fail to open or close in an emergency.
n
Ä
Chapter 10.3.1 “Replace the battery in an active
key” on page 156
This signal may indicate the following states:
n Active key has been activated using the button.
n Active key communicates with other components via
Bluetooth.
The power adapter mode allows cylinders to be locked
using the internal power function and is activated by
pressing on the button for 2 seconds.
Ä
Chapter 1.2.1.2 “Use internal power function” on page 20
This signal may indicate the following states:
n Search for a cylinder which can be taught in
n Search for a cylinder on which you can perform an
internal power locking transaction
–
Ä
Chapter 1.2.1.2 “Use internal power function”
on page 20
Key has been taught in and is awaiting connection to cyl-
inder.
Error in communication with a passive key or cylinder.
Repeat procedure.
Active key is authorised to lock.
Active key is not authorised to lock.
LED display signals in power
adapter mode
Product overview
23.03.2020blueCompact electronic locking system18
To Next Page
Loading...
