wireless Seismic RT System 2 - Connecting to the Recording Truck

R01.i RT System 2 v2.3 Deployment Guide 129
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
5. Point-to-Multipoint Backhaul
Connecting to the Recording Truck
To extract the files, use the built-in Windows 7 extraction process, or you can use a third-
party tool such as 7-Zip.
To use the Windows 7 process:
1 Locate the ZIP file in Windows Explorer.
2 Right-click the ZIP file name and then click Extract All.
3 Browse to and select a folder.
4 Click Extract.
To use 7-Zip:
1 Download and install 7-Zip if it is not already installed:
http://www.7-zip.org/download.html
2 Locate the ZIP file in Windows Explorer.
3 Right-click the ZIP file name and then click 7-zip
ĺ Extract Files.
4 Browse to and select a folder.
5 Click OK.
5.9 Connecting to the Recording Truck
The line communicates to the recording truck through an LIU using one of the following
methods:
i Fiber cable
i Radio link (pendant)
The following figure shows a fiber cable connection example: