wireless Seismic RT System 2 - Rope Knot; Figure G-1 Tying the Taut-Line Hitch Knot; G.G. Rope Knot

RT System 2 v2.3 188 Deployment Guide R01.i
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
G
G. Rope Knot
This chapter shows how to tie a taut-line hitch knot. This loop knot can be adjusted to
loosen or tighten a line, yet holds under a load. This knot is commonly used to secure
tent lines and loads on vehicles. It is the recommended knot for securing the RT System
2 guy rope mast.
The following link provides a short video example:
http://www.sailingcourse.com/videos/taut_line_hitch.htm
Figure G–1 Tying the Taut-line Hitch Knot