wireless Seismic RT System 2 - Figure 4-8 Ubiquiti Discovery Tool Icon

R01.i RT System 2 v2.3 Deployment Guide 73
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
4. Point-to-Point Backhaul
Preparation
4 Open the Ubiquiti Discovery Tool by double-clicking the shortcut on the desktop.
5 The Discovery window opens and displays a list of all Discovered Devices:
Figure 4–8 Ubiquiti
Discovery Tool Icon
NOTE
Ensure that the .bat file and the .jar file are in the same directory.
TIP
The discovery tool can also be downloaded from the following location:
http://www.ubnt.com/download#app
Extract the files from the downloaded ZIP file to the desktop.
NOTE
The factory default IP address for the radios is 192.168.1.20. Configure the
radios one at a time.