wireless Seismic RT System 2 - Figure 2-15 Anchor Plate at WRU Geophone End; Figure 2-16 Anchor Plate Bracket; Figure 2-17 Anchor Bracket Screws

24 RT System 2 v2.3 Deployment Guide R01.i
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
2. Layout
WRU Anchor Plate
c Hold the bracket at the edge of the WRU base as shown in the following figure:
d Secure the bracket to the anchor plate with two screws.
Figure 2–15 Anchor Plate at WRU Geophone End
Figure 2–16 Anchor Plate Bracket
Figure 2–17 Anchor Bracket Screws