R01.i RT System 2 v2.3 Deployment Guide 91
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
4. Point-to-Point Backhaul
Unzipping the Configuration Files
4.9 Unzipping the Configuration Files
The configuration files are delivered combined into one compressed file (config.zip).
To extract the files, use the built-in Windows 7 extraction process, or you can use a third-
party tool such as 7-Zip.
To use the Windows 7 process:
1 Locate the ZIP file in Windows Explorer.
2 Right-click the ZIP file name and then click Extract All.
3 Browse to and select a folder.
4 Click Extract.
To use 7-Zip:
1 Download and install 7-Zip if it is not already installed:
http://www.7-zip.org/download.html
2 Locate the ZIP file in Windows Explorer.
3 Right-click the ZIP file name and then click 7-zip
ĺ Extract Files.
4 Browse to and select a folder.
Figure 4–25 Radio Configuration, Updating Firmware
To Next Page
Loading...