Xerox 4595 - Page 111

Xerox 4595 Copier/Printer User Guide
2-85
2. Copy
 Off
Build Job is not applied.
 On
Build Job is applied. The features that apply to the entire job must
first be selected as necessary.
KEY POINT: Once selected, the settings cannot be changed or
canceled during the copy process.
Copy features that can be programmed, are listed on this page.
 Finishing
For information about finishing feature, refer to “Finishing” on
page 2-80.
 Booklet Creation
For information about booklet creation feature, refer to “Booklet
Creation” on page 2-49.
 Covers
For information about cover feature, refer to “Covers” on page 2-
53.
 Annotation
For information about annotation feature, refer to “Annotation” on
page 2-62.
 Separators
Displays the Build Job - Separators screen.
 Watermark
For information about watermark feature, refer to “When Enter
End Page Number is Selected” on page 2-71.
 Output Orientation
For information about output orientation feature, refer to “Output
Orientation” on page 2-77.