Xerox 4595 Copier/Printer User Guide
2-86
2. Copy
Build Job - Separators Screen
You can insert blank or printed sheets of paper to act as
separators between document jobs. The number of separators
can be set from 1 to 99 as required.
1. From the Job Assembly tab, select Build Job and then select
Separators.
2. Select any item.
3. Use the up/down buttons or numeric keypad to set the
number of copies.
4. Select Save to save your choices.
Off
No separator.
Blank Separators
Insert a blank paper as a separator.
Printed Separators - Side 1
Copies on side 1 when inserting separators.
Printed Separators - Side 2
Copies on side 2 when inserting separators.
Printed Separators - 2-Sided
Copy on the both sides when inserting separators.
To Next Page
Loading...
