Xerox 4595 User Manual

Xerox 4595 Copier/Printer User Guide
11-28
11. Problem Solving
Image is too dark, or
too light
Cause Scan density is set to Dark, or to Light.
No Action Adjust the scan density.
Refer to “Lighten/Darken” on page 3-29.
Cause The Original Type is inappropriate.
Action Select an image quality appropriate for the
document.
Refer to “Image Quality” on page 3-35.
Part of the image is
missing
Cause The document is pasted together or folded in.
No Action It is possible that the folded in or pasted part of the
document is not touching the document glass. Place
a stack of white sheets on the document to hold the
document down flat against the document glass.
The image is not the
desired size
Cause The document glass or the document cover is dirty.
No Action Clean the document glass or the document cover.
Refer to “Cleaning the Document Cover and
Document Glass” on page 10-18.
Cause The document is made of highly transparent material
like a transparency.
Action Place a white sheet of paper on the document and
scan.
Cause The document is misaligned.
Action Load the document correctly.
Refer to “Step 1 Load Documents” on page 3-2.
Cause The document guides are in an incorrect position.
Action Load the document correctly, and align the
document guides with the edges of the document.
Refer to “Step 1 Load Documents” on page 3-2.
Cause The document is a non-standard size.
Action Enter the document size and then scan.
Refer to “Scan Size” on page 3-41.
Cause The document is folded or bent.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English