Xerox 4595 User Manual

Xerox 4595 Copier/Printer User Guide
2-52
2. Copy
Booklet Creation - Subsets screen
A booklet is divided by the number of sheets specified when there
are many pages in a document. It can copy so that the resulting 2-
sided copies can be folded to become a booklet. You can set the
number of sheets in the range from 1 to 50 sheets in 1 sheet
increments
.
NOTE: When specifying Fold, set the dividing number of sheets in
the range from 1 to 15.
When there is a large number of sheets, the number of sheets can
be divided so that booklet does not become thick.
Copies are assigned and discharged in order by specified number
of sheets. You can set the number of sheets (number of division)
in the range from 1 to 50 sheets.
For example, if the number of sheets (the number of division) is
set as "5" in order to use one sheet (side 1/ side 2) of paper with
four documents when creating a booklet, a document will be
assigned per 20 sheets.
1. From the Booklet Creation screen, select On or Off.
2. If you select On, use up/down buttons or the numeric
keypad to specify the number of sheets.
3. Select Save to keep your changes.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English