July 2019
4-54
Xerox® B205/B215 Multifunction Printer Service Manual
REP 4.18
Initial Release
Repairs / Adjustments
3. Remove the feed roll and pickup shaft from the pickup guide, Figure 3.
Figure 3 Feed roll and pickup shaft removal
4. Remove the washer from the feed roller and the bushing from the pickup shaft, F
igure 4.
Figure 4 Washer and bushing removal
5. Remove the width actuator and paper act
uator from the upper pickup guide, Figure 5.
Figure 5 Actuator removal
6. Remove the actuator holder and TS-spring f
rom the width and paper actuators, Figure 6.
Figure 6 Actuator holder and TS-spring removal
To Next Page
Loading...
