July 2019
6-15
Xerox® B205/B215 Multifunction Printer Service Manual
GP 1
General Procedures / Information
Initial Release
GP 1 Diagnostics Entry and Exit (B215 and B205)
Purpose
This procedure describes the following items:
• How to enter Diagnostics Mode.
• How to exit Diagnostics.
For detailed information on Diagnostics Mode menu items, refer to Diagnostic Informat
ion in
t
he Diagnostics section of this service manual.
Procedure - B215 Diagnostics Mode Entry
Diagnostics entry for the B215 Multifunctional Printer:
1. Press and hold the Home Button on
the control panel for at least 5 seconds until the
P
assword screen appears, Figure 1
.
Figure 1 Password screen
2. Touch the box next to Passcode to open the keypad, F
igure 2.
Figure 2 Keypad screen
3. Enter the numbers [1934] as t
he password, then touch [Log In], Figure 3.
Figure 3 Password displayed screen
4. The Diagnostic Entry screen appears, F
igure 4.
The following options are available:
• Data Setup
• Machine Test
• Report
• Exit Diagnostics
Figure 4 Diagnostics entry screen
NOTE: For detailed information on Diagnostics Mode menu items, refer to Diagnost
ic
Information.
To Next Page
Loading...
