July 2019
4-58
Xerox® B205/B215 Multifunction Printer Service Manual
REP 6.1, REP 7.1
Initial Release
Repairs / Adjustments
Replacement
1. The replacement is the reverse of the removal procedure.
NOTE: Make sure the Springs (2) on the Retard Roll Holder are correctly positioned in t
he
holes,
Figure 4
.
Figure 4 Springs in Holder
REP 7.1 Bracket - Connector
Parts List on PL 7.1 (B205)
Parts List on PL
7.2 (B215)
Removal
1. Remove the ADF, REP 1.2. (B215)
2. Remove the Control Panel, RE
P 8.2 (B205), REP 8.2 (B215).
3. Push down on the top of the scanner Front Cover to release five latches on the top of t
he
sc
anner Front Cover, then remove the front cover, Figure 1
.
Figure 1 Scanner top cover
To Next Page
Loading...
