July 2019
6-19
Xerox® B205/B215 Multifunction Printer Service Manual
GP 4
General Procedures / Information
Initial Release
GP 4 Machine Settings
Purpose
Use this procedure is used to provide information on how to select and change machine set-
tings from the B215 UI, B205 Control Panel, CWIS, and the Easy Print Manager.
Procedure (B215 UI)
1. At the Home screen touch [Device > General], Figure 1.
The following configuration settings are available:
•D
ate & Time
• Display Brightness
•Power Save Timer
•Timers
• Measurements
• Altitude Adjustment, refer to GP 5
.
• Humidity Adjustment
F
igure 1 General screen
2. At the Home screen touch [Devi
ce > Paper Trays], Figure 2.
The following configuration settings are available:
•
Tray 1
• Manual Feed Slot
Figure 2 Paper tray screen
3. At the Home screen touch [Devi
ce > Network], Figure 3.
The following configuration settings are available:
• Network Connectivity
• TCP IP Settings
• Advanced Settings
• Display Network Settings
• Clear Settings
Figure 3 Network settings screen
4. At the Home screen touch [De
v
ice > App Defaults], Figure 4.
The following configuration settings are available:
•
Copy Default
• ID Card Copy Default
• Fax Default
• Fax Setup
Figure 4 App defaults screen
To Next Page
Loading...
